Researchers have developed a new method to display highly realistic
holographic images using 'holobricks' that can be stacked together to
generate large-scale holograms.
The researchers, from the University of Cambridge and Disney Research,
developed a holobrick proof-of-concept, which can tile holograms together to
form a large seamless 3-D image. This is the first time this technology has
been demonstrated and opens the door for scalable holographic 3-D displays.
The results are reported in the journal Light: Science & Applications.
As technology develops, people want high-quality visual experiences, from
2-D high resolution TV to 3-D holographic augmented or virtual reality, and
large true 3-D displays. These displays need to support a significant amount
of data flow: for a 2-D full HD display, the information data rate is about
three gigabits per second (Gb/s), but a 3-D display of the same resolution
would require a rate of three terabits per second, which is not yet
available.
Holographic displays can reconstruct high quality images for a real 3-D
visual perception. They are considered the ultimate display technology to
connect the real and virtual worlds for immersive experiences.
"Delivering an adequate 3-D experience using the current technology is a
huge challenge," said Professor Daping Chu from Cambridge's Department of
Engineering, who led the research. "Over the past ten years, we've been
working with our industrial partners to develop holographic displays which
allow the simultaneous realization of large size and large field-of-view,
which needs to be matched with a hologram with a large optical information
content."
However, the information content of current holograms information is much
greater than the display capabilities of current light engines, known as
spatial light modulators, due to their limited space bandwidth product.
|
| Reconstructed holographic images of a toy train with holobricks, (top), and original image captured by a camera (bottom). Credit: University of Cambridge |
For 2-D displays, it's standard practice to tile small size displays
together to form one large display. The approach being explored here is
similar, but for 3-D displays, which has not been done before. "Joining
pieces of 3-D images together is not trivial, because the final image must
be seen as seamless from all angles and all depths," said Chu, who is also
Director of the Center for Advanced Photonics and Electronics (CAPE).
"Directly tiling 3-D images in real space is just not possible."
To address this challenge, the researchers developed the holobrick unit,
based on coarse integrated holographic displays for angularly tiled 3-D
images, a concept developed at CAPE with Disney Research about seven years
ago.
Each of the holobricks uses a high-information bandwidth spatial light
modulator for information delivery in conjunction with coarse integrated
optics, to form the angularly tiled 3-D holograms with large viewing areas
and fields of view.
Careful optical design makes sure the holographic fringe pattern fills the
entire face of the holobrick, so that multiple holobricks can be seamlessly
stacked to form a scalable spatially tiled holographic image 3-D display,
capable of both wide field-of-view angle and large size.
The proof-of-concept developed by the researchers is made of two seamlessly
tiled holobricks. Each full-color brick is 1024×768 pixels, with a 40° field
of view and 24 frames per second, to display tiled holograms for full 3-D
images.
"There are still many challenges ahead to make ultra-large 3-D displays with
wide viewing angles, such as a holographic 3-D wall," said Chu. "We hope
that this work can provide a promising way to tackle this issue based on the
currently limited display capability of spatial light modulators."
Reference:
Holobricks: Modular Coarse Integral Holographic Displays, Light: Science &
Applications (2022).
DOI: 10.1038/s41377-022-00752-7